Escoge la categoría

Study of Electro Discharge Machining of Non-Conductive Ceramic On Alumina & Glass

  • Autor:

  • Editores:

  • Editorial:

  • Año de Edición:

  • Idioma:

  • Nº Páginas:

  • ISBN:

  • Formato:
    Comparte

    Por: $67.900,00ou X de


    Comprar
    bw-study-of-electro-discharge-machining-of-nonconductive-ceramic-on-alumina-amp-glass-bookrix-9783743849747
    Study of Electro Discharge Machining of Non-Conductive Ceramic On Alumina & Glass
    Por: $67.900,00ou
    48x de $1.414,58
    sem juros
    ComprarVendedor Libreria de la U
    BW1027335114

    Electric Discharge Machining (EDM) is very important and prominent machining process
    among all the newly developed non -traditional machining techniques. This process is
    extremely useful for "difficult to machine" conducting materials such as heat treated tool
    steels, composites, super alloys, heat resistant steels, ceramics, carbides, etc. In this
    technique i.e. in EDM, the material removal of the electrode is achieved through high
    frequency sparks between the tool and the work-piece immersed into the dielectric. The
    Material Removal Rate (MRR), Tool Wear Rate (TWR) and surface roughness are some of
    the important performance parameter of EDM process. The objective of EDM is to get high
    MRR as well as achieving reasonably good surface quality of machined component. The
    machining parameters that achieve the highest MRR strongly depend on the size of the
    machining surface i.e. Electrode used and work-piece surface. With upcoming worldwide
    important applications of Non-Conductive ceramics machining has become an important
    issue which needs to be investigated in much detail. The Alumina (Al2O3), Glass and other
    advanced engineering ceramics are rapidly emerging class of engineering materials
    possessing a wide range of remarkable properties i.e. high hardness, chemical stability,
    very low friction, unique electrical properties and these engineering ceramics posses high
    wear resistance which make them highly suitable for such engineering applications as jet
    engines and other aeronautical components, tools and dies and electronic sensors.

    Atributos LU

    TítuloStudy of Electro Discharge Machining of Non-Conductive Ceramic On Alumina & Glass
    AutorCharanjit Singh, Dr. Chandan Deep Singh, Sanjeev Verma
    TipoeBook
    ISXN9783743849747
    Año de Edición2018
    Núm. Páginas30
    Peso (Físico)0
    IdiomaInglés
    Tamaño Archivo (Virtual)2.64
    Formato Electrónico (Virtual)EPUB
    DRM (Virtual)

    Títulos Similares